Roll Cage Archives - Billadeau Speed & Automotive

Jamie’s ’71 Plymouth Satellite

billadeau-speed — Thu, 14 Nov 2019 21:23:31 +0000

Jamie’s 1971 Satellite came to us as a stock 383 car. Now it’s had the full Super Stock treatment and has been kitted out with a 493ci, 685hp motor, a new transmission, a Dana 60, Caltracs, a roll bar and a period Super Stock paint job. Shake ‘n’ Bake!

The post Jamie’s ’71 Plymouth Satellite appeared first on Billadeau Speed & Automotive.

Tim’s ’64 AFX Polara

billadeau-speed — Fri, 20 Oct 2017 14:28:15 +0000

Tim brought his wild AFX Polara over to the Billadeau workshop for a number of jobs. We narrowed and installed a Dana 60 axle along with fitting some roll bar additions, shock mounts and steering brackets.

The post Tim’s ’64 AFX Polara appeared first on Billadeau Speed & Automotive.

Dave Billadeau’s Plymouth Superbird

billadeau-speed — Thu, 19 Oct 2017 18:12:45 +0000

Time for another Billadeau project car – a Superbird clone. Early work included a Dana 60 being built, painting the engine bay, fitting a roll cage and getting the front suspension built and powder coated…

The Superbird came together and the HEMI took residence. Making 857HP it was good enough for strong 9 second quarter miles at over 140mph! After a couple seasons in American Super Stock, the car eventually moved on to a new owner.

The post Dave Billadeau’s Plymouth Superbird appeared first on Billadeau Speed & Automotive.

Chris’s Oldsmobile 442

billadeau-speed — Thu, 19 Oct 2017 17:28:23 +0000

Billadeau Speed fully recommissioned Chris’s blown 455ci Olds motor. We also modified and re-welded the roll cage, fitted a new fuel cell, remounted the seats and also fitted new gauges and MSD, amongst other small jobs.

The post Chris’s Oldsmobile 442 appeared first on Billadeau Speed & Automotive.

Phil’s ’70 Plymouth Road Runner

billadeau-speed — Wed, 18 Oct 2017 21:14:15 +0000

Phil’s Road Runner came to us for a number of jobs including the fitting of a Sure-Grip diff, a transmission and brake rebuild, alteration of the roll bar and wiring. The heads were also removed to repair some broken header studs.

The post Phil’s ’70 Plymouth Road Runner appeared first on Billadeau Speed & Automotive.

Jason & Tracey’s ’69 Plymouth Belvedere

billadeau-speed — Wed, 18 Oct 2017 19:17:08 +0000

Jason and Tracey’s Belvedere was fitted with a 6 point roll bar and new front seats, upholstered to match the rears, with 3″ harnesses. The engine bay was rewired and Auto Meter gauges were installed, along with new gears, new shifter and a new fuel system.

The post Jason & Tracey’s ’69 Plymouth Belvedere appeared first on Billadeau Speed & Automotive.

Nick’s ’91 Ford Mustang

billadeau-speed — Tue, 17 Oct 2017 18:22:30 +0000

Following the installation of a freshly built 347ci stroked small block Ford motor, as seen in the photo, Nick wanted more power.

A nitrous system was fitted, which saw ETs drop from 13.0s to 11.3s. A roll cage was then needed to abide by drag racing rules & regulations, so another visit to us saw that issue solved. The Mustang was then repainted lime green & black. The pics below show the bodywork preparation and the completed paint job.

The post Nick’s ’91 Ford Mustang appeared first on Billadeau Speed & Automotive.

Dan’s ’67 Chevrolet Camaro

billadeau-speed — Sat, 14 Oct 2017 10:06:54 +0000

After the ETs of the Camaro came tumbling down it became clear that Dan needed to install a roll cage to meet drag racing rules & regulations. He brought the Camaro to us, where a CDS six point roll bar legal up to 10.90sec was installed. The car was running in the 11.50s at the time.

The post Dan’s ’67 Chevrolet Camaro appeared first on Billadeau Speed & Automotive.

Scott’s ’69 Plymouth Road Runner

billadeau-speed — Fri, 13 Oct 2017 22:28:21 +0000

Part of the Billadeau Mopar collection, Scott’s 720hp Road Runner had a Billadeau built 540 MP Mega Block with Lunati crank, Ross pistons, Crower roller cam, Manley rods, Indy CNC 440-1 heads and Dominator carb. As of April 2007 the car had run a best of 10.7@128mph.

Other work included bodywork, fitting the roll bar and wiring.

The Wedge motor was freshened up ready for the 2011 season with a new cam, rings, bearings and a bit of head and intake porting. It dyno’d at 781hp with 698ft-lbs of torque.

The car has since been returned to stock and found a new home.

The post Scott’s ’69 Plymouth Road Runner appeared first on Billadeau Speed & Automotive.

Pat’s ’68 Dodge Charger

billadeau-speed — Fri, 13 Oct 2017 20:01:10 +0000

Billadeau Speed fitted the engine and transmission to Pat’s Charger. A roll cage was also installed and the car was fully rewired. The Bumble Bee stripe was also applied.

The post Pat’s ’68 Dodge Charger appeared first on Billadeau Speed & Automotive.